OpenStack Grizzly Install Guide-白红宇

OpenStack Grizzly Install Guide

阅读量：5759 次

发布时间：2019-06-18

本文共 24118 字，大约阅读时间需要 80 分钟。

Table of Contents0. What is it?1. Requirements2. Controller Node3. Network Node4. Compute Node5. Your first VM6. Licensing7. Contacts8. Credits9. To do

0. What is it?

OpenStack Grizzly Install Guide is an easy and tested way to create your own OpenStack platform.

If you like it, don't forget to star it !

Status: Stable

1. Requirements

Node Role:	NICs
Control Node:	eth0 (10.10.10.51), eth1 (192.168.100.51)
Network Node:	eth0 (10.10.10.52), eth1 (10.20.20.52), eth2 (192.168.100.52)
Compute Node:	eth0 (10.10.10.53), eth1 (10.20.20.53)

Note 1: Always use dpkg -s <packagename> to make sure you are using grizzly packages (version : 2013.1)

Note 2: This is my current network architecture, you can add as many compute node as you wish.

2. Controller Node2.1. Preparing Ubuntu

After you install Ubuntu 12.04 or 13.04 Server 64bits, Go in sudo mode and don't leave it until the end of this guide:

sudo su

Add Grizzly repositories [Only for Ubuntu 12.04]:

apt-get install -y ubuntu-cloud-keyringecho deb precise-updates/grizzly main >> /etc/apt/sources.list.d/grizzly.list

Update your system:

apt-get update -yapt-get upgrade -yapt-get dist-upgrade -y

2.2. Networking

Only one NIC should have an internet access:

#For Exposing OpenStack API over the internetauto eth1iface eth1 inet staticaddress 192.168.100.51netmask 255.255.255.0gateway 192.168.100.1dns-nameservers 8.8.8.8#Not internet connected(used for OpenStack management)auto eth0iface eth0 inet staticaddress 10.10.10.51netmask 255.255.255.0

Restart the networking service:

service networking restart

2.3. MySQL & RabbitMQ

Install MySQL:

apt-get install -y mysql-server python-mysqldb

Configure mysql to accept all incoming requests:

sed -i 's/127.0.0.1/0.0.0.0/g' /etc/mysql/my.cnfservice mysql restart

2.4. RabbitMQ

Install RabbitMQ:

apt-get install -y rabbitmq-server

Install NTP service:

apt-get install -y ntp

Create these databases:

mysql -u root -p#KeystoneCREATE DATABASE keystone;GRANT ALL ON keystone.* TO 'keystoneUser'@'%' IDENTIFIED BY 'keystonePass';#GlanceCREATE DATABASE glance;GRANT ALL ON glance.* TO 'glanceUser'@'%' IDENTIFIED BY 'glancePass';#QuantumCREATE DATABASE quantum;GRANT ALL ON quantum.* TO 'quantumUser'@'%' IDENTIFIED BY 'quantumPass';#NovaCREATE DATABASE nova;GRANT ALL ON nova.* TO 'novaUser'@'%' IDENTIFIED BY 'novaPass';#CinderCREATE DATABASE cinder;GRANT ALL ON cinder.* TO 'cinderUser'@'%' IDENTIFIED BY 'cinderPass';quit;

2.5. Others

Install other services:

apt-get install -y vlan bridge-utils

Enable IP_Forwarding:

sed -i 's/#net.ipv4.ip_forward=1/net.ipv4.ip_forward=1/' /etc/sysctl.conf# To save you from rebooting, perform the followingsysctl net.ipv4.ip_forward=1

2.6. Keystone

Start by the keystone packages:

apt-get install -y keystone

Adapt the connection attribute in the /etc/keystone/keystone.conf to the new database:

connection = mysql://keystoneUser:keystonePass@10.10.10.51/keystone

Restart the identity service then synchronize the database:

service keystone restartkeystone-manage db_sync

Fill up the keystone database using the two scripts available in the of this git repository:

#Modify the **HOST_IP** and **EXT_HOST_IP** variables before executing the scriptswget +x keystone_basic.shchmod +x keystone_endpoints_basic.sh./keystone_basic.sh./keystone_endpoints_basic.sh

Create a simple credential file and load it so you won't be bothered later:

nano creds#Paste the following:export OS_TENANT_NAME=adminexport OS_USERNAME=adminexport OS_PASSWORD=admin_passexport OS_AUTH_URL="http://192.168.100.51:5000/v2.0/"# Load it:source creds

To test Keystone, we use a simple CLI command:

keystone user-list

2.7. Glance

We Move now to Glance installation:

apt-get install -y glance

Update /etc/glance/glance-api-paste.ini with:

[filter:authtoken]paste.filter_factory = keystoneclient.middleware.auth_token:filter_factorydelay_auth_decision = trueauth_host = 10.10.10.51auth_port = 35357auth_protocol = httpadmin_tenant_name = serviceadmin_user = glanceadmin_password = service_pass

Update the /etc/glance/glance-registry-paste.ini with:

[filter:authtoken]paste.filter_factory = keystoneclient.middleware.auth_token:filter_factoryauth_host = 10.10.10.51auth_port = 35357auth_protocol = httpadmin_tenant_name = serviceadmin_user = glanceadmin_password = service_pass

Update /etc/glance/glance-api.conf with:

sql_connection = mysql://glanceUser:glancePass@10.10.10.51/glance

And:

[paste_deploy]flavor = keystone

Update the /etc/glance/glance-registry.conf with:

sql_connection = mysql://glanceUser:glancePass@10.10.10.51/glance

And:

[paste_deploy]flavor = keystone

Restart the glance-api and glance-registry services:

service glance-api restart; service glance-registry restart

Synchronize the glance database:

glance-manage db_sync

To test Glance, upload the cirros cloud image directly from the internet:

glance image-create --name myFirstImage --is-public true --container-format bare --disk-format qcow2 --location

Now list the image to see what you have just uploaded:

glance image-list

2.8. Quantum

Install the Quantum server and the OpenVSwitch package collection:

apt-get install -y quantum-server

Edit the OVS plugin configuration file /etc/quantum/plugins/openvswitch/ovs_quantum_plugin.ini with:

#Under the database section[DATABASE]sql_connection = mysql://quantumUser:quantumPass@10.10.10.51/quantum#Under the OVS section[OVS]tenant_network_type = gretunnel_id_ranges = 1:1000enable_tunneling = True#Firewall driver for realizing quantum security group function[SECURITYGROUP]firewall_driver = quantum.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver

Edit /etc/quantum/api-paste.ini

[filter:authtoken]paste.filter_factory = keystoneclient.middleware.auth_token:filter_factoryauth_host = 10.10.10.51auth_port = 35357auth_protocol = httpadmin_tenant_name = serviceadmin_user = quantumadmin_password = service_pass

Update the /etc/quantum/quantum.conf:

[keystone_authtoken]auth_host = 10.10.10.51auth_port = 35357auth_protocol = httpadmin_tenant_name = serviceadmin_user = quantumadmin_password = service_passsigning_dir = /var/lib/quantum/keystone-signing

Restart the quantum server:

service quantum-server restart

2.9. Nova

Start by installing nova components:

apt-get install -y nova-api nova-cert novnc nova-consoleauth nova-scheduler nova-novncproxy nova-doc nova-conductor

Now modify authtoken section in the /etc/nova/api-paste.ini file to this:

[filter:authtoken]paste.filter_factory = keystoneclient.middleware.auth_token:filter_factoryauth_host = 10.10.10.51auth_port = 35357auth_protocol = httpadmin_tenant_name = serviceadmin_user = novaadmin_password = service_passsigning_dirname = /tmp/keystone-signing-nova# Workaround for = v2.0

Modify the /etc/nova/nova.conf like this:

[DEFAULT]logdir=/var/log/novastate_path=/var/lib/novalock_path=/run/lock/novaverbose=Trueapi_paste_config=/etc/nova/api-paste.inicompute_scheduler_driver=nova.scheduler.simple.SimpleSchedulerrabbit_host=10.10.10.51nova_url=http://10.10.10.51:8774/v1.1/sql_connection=mysql://novaUser:novaPass@10.10.10.51/novaroot_helper=sudo nova-rootwrap /etc/nova/rootwrap.conf# Authuse_deprecated_auth=falseauth_strategy=keystone# Imaging serviceglance_api_servers=10.10.10.51:9292image_service=nova.image.glance.GlanceImageService# Vnc configurationnovnc_enabled=truenovncproxy_base_url=http://192.168.100.51:6080/vnc_auto.htmlnovncproxy_port=6080vncserver_proxyclient_address=10.10.10.51vncserver_listen=0.0.0.0# Network settingsnetwork_api_class=nova.network.quantumv2.api.APIquantum_url=http://10.10.10.51:9696quantum_auth_strategy=keystonequantum_admin_tenant_name=servicequantum_admin_username=quantumquantum_admin_password=service_passquantum_admin_auth_url=http://10.10.10.51:35357/v2.0libvirt_vif_driver=nova.virt.libvirt.vif.LibvirtHybridOVSBridgeDriverlinuxnet_interface_driver=nova.network.linux_net.LinuxOVSInterfaceDriver#If you want Quantum + Nova Security groupsfirewall_driver=nova.virt.firewall.NoopFirewallDriversecurity_group_api=quantum#If you want Nova Security groups only, comment the two lines above and uncomment line -1-.#-1-firewall_driver=nova.virt.libvirt.firewall.IptablesFirewallDriver#Metadataservice_quantum_metadata_proxy = Truequantum_metadata_proxy_shared_secret = helloOpenStack# Compute #compute_driver=libvirt.LibvirtDriver# Cinder #volume_api_class=nova.volume.cinder.APIosapi_volume_listen_port=5900

Synchronize your database:

nova-manage db sync

Restart nova-* services:

cd /etc/init.d/; for i in $( ls nova-* ); do sudo service $i restart; done

Check for the smiling faces on nova-* services to confirm your installation:

nova-manage service list

2.10. Cinder

Install the required packages:

apt-get install -y cinder-api cinder-scheduler cinder-volume iscsitarget open-iscsi iscsitarget-dkms

Configure the iscsi services:

sed -i 's/false/true/g' /etc/default/iscsitarget

Restart the services:

service iscsitarget startservice open-iscsi start

Configure /etc/cinder/api-paste.ini like the following:

[filter:authtoken]paste.filter_factory = keystoneclient.middleware.auth_token:filter_factoryservice_protocol = httpservice_host = 192.168.100.51service_port = 5000auth_host = 10.10.10.51auth_port = 35357auth_protocol = httpadmin_tenant_name = serviceadmin_user = cinderadmin_password = service_passsigning_dir = /var/lib/cinder

Edit the /etc/cinder/cinder.conf to:

[DEFAULT]rootwrap_config=/etc/cinder/rootwrap.confsql_connection = mysql://cinderUser:cinderPass@10.10.10.51/cinderapi_paste_config = /etc/cinder/api-paste.iniiscsi_helper=ietadmvolume_name_template = volume-%svolume_group = cinder-volumesverbose = Trueauth_strategy = keystoneiscsi_ip_address=10.10.10.51

Then, synchronize your database:

cinder-manage db sync

Finally, don't forget to create a volumegroup and name it cinder-volumes:

dd if=/dev/zero of=cinder-volumes bs=1 count=0 seek=2Glosetup /dev/loop2 cinder-volumesfdisk /dev/loop2#Type in the followings:np1ENTERENTERt8ew

Proceed to create the physical volume then the volume group:

pvcreate /dev/loop2vgcreate cinder-volumes /dev/loop2

Note: Beware that this volume group gets lost after a system reboot. (Click to know how to load it after a reboot)

Restart the cinder services:

cd /etc/init.d/; for i in $( ls cinder-* ); do sudo service $i restart; done

Verify if cinder services are running:

cd /etc/init.d/; for i in $( ls cinder-* ); do sudo service $i status; done

2.11. Horizon

To install horizon, proceed like this

apt-get install -y openstack-dashboard memcached

If you don't like the OpenStack ubuntu theme, you can remove the package to disable it:

dpkg --purge openstack-dashboard-ubuntu-theme

Reload Apache and memcached:

service apache2 restart; service memcached restart

Check OpenStack Dashboard at . We can login with the admin / admin_pass

3. Network Node3.1. Preparing the Node

After you install Ubuntu 12.04 or 13.04 Server 64bits, Go in sudo mode:

sudo su

Add Grizzly repositories [Only for Ubuntu 12.04]:

apt-get install -y ubuntu-cloud-keyringecho deb precise-updates/grizzly main >> /etc/apt/sources.list.d/grizzly.list

Update your system:

apt-get update -yapt-get upgrade -yapt-get dist-upgrade -y

Install ntp service:

apt-get install -y ntp

Configure the NTP server to follow the controller node:

#Comment the ubuntu NTP serverssed -i 's/server 0.ubuntu.pool.ntp.org/#server 0.ubuntu.pool.ntp.org/g' /etc/ntp.confsed -i 's/server 1.ubuntu.pool.ntp.org/#server 1.ubuntu.pool.ntp.org/g' /etc/ntp.confsed -i 's/server 2.ubuntu.pool.ntp.org/#server 2.ubuntu.pool.ntp.org/g' /etc/ntp.confsed -i 's/server 3.ubuntu.pool.ntp.org/#server 3.ubuntu.pool.ntp.org/g' /etc/ntp.conf#Set the network node to follow up your conroller nodesed -i 's/server ntp.ubuntu.com/server 10.10.10.51/g' /etc/ntp.confservice ntp restart

Install other services:

apt-get install -y vlan bridge-utils

Enable IP_Forwarding:

sed -i 's/#net.ipv4.ip_forward=1/net.ipv4.ip_forward=1/' /etc/sysctl.conf# To save you from rebooting, perform the followingsysctl net.ipv4.ip_forward=1

3.2.Networking

3 NICs must be present:

# OpenStack managementauto eth0iface eth0 inet staticaddress 10.10.10.52netmask 255.255.255.0# VM Configurationauto eth1iface eth1 inet staticaddress 10.20.20.52netmask 255.255.255.0# VM internet Accessauto eth2iface eth2 inet staticaddress 192.168.100.52netmask 255.255.255.0

3.4. OpenVSwitch (Part1)

Install the openVSwitch:

apt-get install -y openvswitch-switch openvswitch-datapath-dkms

Create the bridges:

#br-int will be used for VM integrationovs-vsctl add-br br-int#br-ex is used to make to VM accessible from the internetovs-vsctl add-br br-ex

3.5. Quantum

Install the Quantum openvswitch agent, l3 agent and dhcp agent:

apt-get -y install quantum-plugin-openvswitch-agent quantum-dhcp-agent quantum-l3-agent quantum-metadata-agent

Edit /etc/quantum/api-paste.ini:

[filter:authtoken]paste.filter_factory = keystoneclient.middleware.auth_token:filter_factoryauth_host = 10.10.10.51auth_port = 35357auth_protocol = httpadmin_tenant_name = serviceadmin_user = quantumadmin_password = service_pass

Edit the OVS plugin configuration file /etc/quantum/plugins/openvswitch/ovs_quantum_plugin.ini with:

#Under the database section[DATABASE]sql_connection = mysql://quantumUser:quantumPass@10.10.10.51/quantum#Under the OVS section[OVS]tenant_network_type = gretunnel_id_ranges = 1:1000integration_bridge = br-inttunnel_bridge = br-tunlocal_ip = 10.20.20.52enable_tunneling = True#Firewall driver for realizing quantum security group function[SECURITYGROUP]firewall_driver = quantum.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver

Update /etc/quantum/metadata_agent.ini:

# The Quantum user information for accessing the Quantum API.auth_url = = RegionOneadmin_tenant_name = serviceadmin_user = quantumadmin_password = service_pass# IP address used by Nova metadata servernova_metadata_ip = 10.10.10.51# TCP Port used by Nova metadata servernova_metadata_port = 8775metadata_proxy_shared_secret = helloOpenStack

Make sure that your rabbitMQ IP in /etc/quantum/quantum.conf is set to the controller node:

rabbit_host = 10.10.10.51#And update the keystone_authtoken section[keystone_authtoken]auth_host = 10.10.10.51auth_port = 35357auth_protocol = httpadmin_tenant_name = serviceadmin_user = quantumadmin_password = service_passsigning_dir = /var/lib/quantum/keystone-signing

Edit /etc/sudoers.d/quantum_sudoers to give it full access like this (This is unfortunatly mandatory)

nano /etc/sudoers.d/quantum_sudoers#Modify the quantum userquantum ALL=NOPASSWD: ALL

Restart all the services:

cd /etc/init.d/; for i in $( ls quantum-* ); do sudo service $i restart; done

3.4. OpenVSwitch (Part2)

Edit the eth2 in /etc/network/interfaces to become like this:

# VM internet Accessauto eth2iface eth2 inet manualup ifconfig $IFACE 0.0.0.0 upup ip link set $IFACE promisc ondown ip link set $IFACE promisc offdown ifconfig $IFACE down

Add the eth2 to the br-ex:

#Internet connectivity will be lost after this step but this won't affect OpenStack's workovs-vsctl add-port br-ex eth2#If you want to get internet connection back, you can assign the eth2's IP address to the br-ex in the /etc/network/interfaces file.

4. Compute Node4.1. Preparing the Node

After you install Ubuntu 12.04 or 13.04 Server 64bits, Go in sudo mode:

sudo su

Add Grizzly repositories [Only for Ubuntu 12.04]:

apt-get install -y ubuntu-cloud-keyringecho deb precise-updates/grizzly main >> /etc/apt/sources.list.d/grizzly.list

Update your system:

apt-get update -yapt-get upgrade -yapt-get dist-upgrade -y

Reboot (you might have new kernel)

Install ntp service:

apt-get install -y ntp

Configure the NTP server to follow the controller node:

#Comment the ubuntu NTP serverssed -i 's/server 0.ubuntu.pool.ntp.org/#server 0.ubuntu.pool.ntp.org/g' /etc/ntp.confsed -i 's/server 1.ubuntu.pool.ntp.org/#server 1.ubuntu.pool.ntp.org/g' /etc/ntp.confsed -i 's/server 2.ubuntu.pool.ntp.org/#server 2.ubuntu.pool.ntp.org/g' /etc/ntp.confsed -i 's/server 3.ubuntu.pool.ntp.org/#server 3.ubuntu.pool.ntp.org/g' /etc/ntp.conf#Set the compute node to follow up your conroller nodesed -i 's/server ntp.ubuntu.com/server 10.10.10.51/g' /etc/ntp.confservice ntp restart

Install other services:

apt-get install -y vlan bridge-utils

Enable IP_Forwarding:

sed -i 's/#net.ipv4.ip_forward=1/net.ipv4.ip_forward=1/' /etc/sysctl.conf# To save you from rebooting, perform the followingsysctl net.ipv4.ip_forward=1

4.2.Networking

Perform the following:

# OpenStack managementauto eth0iface eth0 inet staticaddress 10.10.10.53netmask 255.255.255.0# VM Configurationauto eth1iface eth1 inet staticaddress 10.20.20.53netmask 255.255.255.0

4.3 KVM

make sure that your hardware enables virtualization:

apt-get install -y cpu-checkerkvm-ok

Normally you would get a good response. Now, move to install kvm and configure it:

apt-get install -y kvm libvirt-bin pm-utils

Edit the cgroup_device_acl array in the /etc/libvirt/qemu.conf file to:

cgroup_device_acl = ["/dev/null", "/dev/full", "/dev/zero","/dev/random", "/dev/urandom","/dev/ptmx", "/dev/kvm", "/dev/kqemu","/dev/rtc", "/dev/hpet","/dev/net/tun"]

Delete default virtual bridge

virsh net-destroy defaultvirsh net-undefine default

Enable live migration by updating /etc/libvirt/libvirtd.conf file:

listen_tls = 0listen_tcp = 1auth_tcp = "none"

Edit libvirtd_opts variable in /etc/init/libvirt-bin.conf file:

env libvirtd_opts="-d -l"

Edit /etc/default/libvirt-bin file

libvirtd_opts="-d -l"

Restart the libvirt service and dbus to load the new values:

service dbus restart && service libvirt-bin restart

4.4. OpenVSwitch

Install the openVSwitch:

apt-get install -y openvswitch-switch openvswitch-datapath-dkms

Create the bridges:

#br-int will be used for VM integrationovs-vsctl add-br br-int

4.5. Quantum

Install the Quantum openvswitch agent:

apt-get -y install quantum-plugin-openvswitch-agent

Edit the OVS plugin configuration file /etc/quantum/plugins/openvswitch/ovs_quantum_plugin.ini with:

#Under the database section[DATABASE]sql_connection = mysql://quantumUser:quantumPass@10.10.10.51/quantum#Under the OVS section[OVS]tenant_network_type = gretunnel_id_ranges = 1:1000integration_bridge = br-inttunnel_bridge = br-tunlocal_ip = 10.20.20.53enable_tunneling = True#Firewall driver for realizing quantum security group function[SECURITYGROUP]firewall_driver = quantum.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver

Make sure that your rabbitMQ IP in /etc/quantum/quantum.conf is set to the controller node:

rabbit_host = 10.10.10.51#And update the keystone_authtoken section[keystone_authtoken]auth_host = 10.10.10.51auth_port = 35357auth_protocol = httpadmin_tenant_name = serviceadmin_user = quantumadmin_password = service_passsigning_dir = /var/lib/quantum/keystone-signing

Restart all the services:

service quantum-plugin-openvswitch-agent restart

4.6. Nova

Install nova's required components for the compute node:

apt-get install -y nova-compute-kvm

Now modify authtoken section in the /etc/nova/api-paste.ini file to this:

[filter:authtoken]paste.filter_factory = keystoneclient.middleware.auth_token:filter_factoryauth_host = 10.10.10.51auth_port = 35357auth_protocol = httpadmin_tenant_name = serviceadmin_user = novaadmin_password = service_passsigning_dirname = /tmp/keystone-signing-nova# Workaround for = v2.0

Edit /etc/nova/nova-compute.conf file

[DEFAULT]libvirt_type=kvmlibvirt_ovs_bridge=br-intlibvirt_vif_type=ethernetlibvirt_vif_driver=nova.virt.libvirt.vif.LibvirtHybridOVSBridgeDriverlibvirt_use_virtio_for_bridges=True

Modify the /etc/nova/nova.conf like this:

[DEFAULT]logdir=/var/log/novastate_path=/var/lib/novalock_path=/run/lock/novaverbose=Trueapi_paste_config=/etc/nova/api-paste.inicompute_scheduler_driver=nova.scheduler.simple.SimpleSchedulerrabbit_host=10.10.10.51nova_url=http://10.10.10.51:8774/v1.1/sql_connection=mysql://novaUser:novaPass@10.10.10.51/novaroot_helper=sudo nova-rootwrap /etc/nova/rootwrap.conf# Authuse_deprecated_auth=falseauth_strategy=keystone# Imaging serviceglance_api_servers=10.10.10.51:9292image_service=nova.image.glance.GlanceImageService# Vnc configurationnovnc_enabled=truenovncproxy_base_url=http://192.168.100.51:6080/vnc_auto.htmlnovncproxy_port=6080vncserver_proxyclient_address=10.10.10.53vncserver_listen=0.0.0.0# Network settingsnetwork_api_class=nova.network.quantumv2.api.APIquantum_url=http://10.10.10.51:9696quantum_auth_strategy=keystonequantum_admin_tenant_name=servicequantum_admin_username=quantumquantum_admin_password=service_passquantum_admin_auth_url=http://10.10.10.51:35357/v2.0libvirt_vif_driver=nova.virt.libvirt.vif.LibvirtHybridOVSBridgeDriverlinuxnet_interface_driver=nova.network.linux_net.LinuxOVSInterfaceDriver#If you want Quantum + Nova Security groupsfirewall_driver=nova.virt.firewall.NoopFirewallDriversecurity_group_api=quantum#If you want Nova Security groups only, comment the two lines above and uncomment line -1-.#-1-firewall_driver=nova.virt.libvirt.firewall.IptablesFirewallDriver#Metadataservice_quantum_metadata_proxy = Truequantum_metadata_proxy_shared_secret = helloOpenStack# Compute #compute_driver=libvirt.LibvirtDriver# Cinder #volume_api_class=nova.volume.cinder.APIosapi_volume_listen_port=5900cinder_catalog_info=volume:cinder:internalURL

Restart nova-* services:

cd /etc/init.d/; for i in $( ls nova-* ); do sudo service $i restart; done

Check for the smiling faces on nova-* services to confirm your installation:

nova-manage service list

5. Your first VM

To start your first VM, we first need to create a new tenant, user and internal network.

Create a new tenant

keystone tenant-create --name project_one

Create a new user and assign the member role to it in the new tenant (keystone role-list to get the appropriate id):

keystone user-create --name=user_one --pass=user_one --tenant-id $put_id_of_project_one --email=user_one@domain.comkeystone user-role-add --tenant-id $put_id_of_project_one --user-id $put_id_of_user_one --role-id $put_id_of_member_role

Create a new network for the tenant:

quantum net-create --tenant-id $put_id_of_project_one net_proj_one

Create a new subnet inside the new tenant network:

quantum subnet-create --tenant-id $put_id_of_project_one net_proj_one 50.50.1.0/24 --dns_nameservers list=true 8.8.8.7 8.8.8.8

Create a router for the new tenant:

quantum router-create --tenant-id $put_id_of_project_one router_proj_one

Add the router to the running l3 agent (if it wasn't automatically added):

quantum agent-list (to get the l3 agent ID)quantum l3-agent-router-add $l3_agent_ID router_proj_one

Add the router to the subnet:

quantum router-interface-add $put_router_proj_one_id_here $put_subnet_id_here

Restart all quantum services:

cd /etc/init.d/; for i in $( ls quantum-* ); do sudo service $i restart; done

Create an external network with the tenant id belonging to the admin tenant (keystone tenant-list to get the appropriate id):

quantum net-create --tenant-id $put_id_of_admin_tenant ext_net --router:external=True

Create a subnet for the floating ips:

quantum subnet-create --tenant-id $put_id_of_admin_tenant --allocation-pool start=192.168.100.102,end=192.168.100.126 --gateway 192.168.100.1 ext_net 192.168.100.100/24 --enable_dhcp=False

Set your router's gateway to the external network:

quantum router-gateway-set $put_router_proj_one_id_here $put_id_of_ext_net_here

Source creds relative to your project one tenant now:

nano creds_proj_one#Paste the following:export OS_TENANT_NAME=project_oneexport OS_USERNAME=user_oneexport OS_PASSWORD=user_oneexport OS_AUTH_URL="http://192.168.100.51:5000/v2.0/"source creds_proj_one

Add this security rules to make your VMs pingable:

nova --no-cache secgroup-add-rule default icmp -1 -1 0.0.0.0/0nova --no-cache secgroup-add-rule default tcp 22 22 0.0.0.0/0